Do devices using Wi-Fi Easy Connect need to be manually reconfigured when there is a change to a network?

Do devices using Wi-Fi Easy Connect need to be manually reconfigured when there is a change to a network?

No. Wi-Fi Easy Connect allows for a device to systematically discover and re-engage in the configuration process with the configurator to receive updated network configuration information. This is especially useful for IoT devices with a limited user interface (UI) or where a device may be installed in a hard-to-reach location.

Video

Wi-Fi Alliance News See All

The Beacon Blog See All

The Signal Podcast See All

Additional Resources

Frequently Asked Questions

How can a device be connected to a network with minimum user intervention?

A device can be seamlessly added to the network with near zero touch or true zero touch methods. Near zero touch provisioning and configuration can be done using a QR code. True zero touch provisioning and configuration can be done by downloading device information into the configurator from the cloud. The user simply powers up the device and it is automatically connected to the network.

Does Wi-Fi Easy Connect support enterprise applications with higher levels of security?

Yes, Wi-Fi Easy Connect supports enterprise provisioning using WPA3-Enterprise security, requiring EAP-TLS authentication. When using EAP-TLS, clients and servers mutually authenticate using X.509 certificates. With Wi-Fi Easy Connect, the enrollee should receive its certificate when provisioning occurs.

Can there be more than one configurator on a network?

Yes, Wi-Fi Easy Connect supports multiple configurators on a network. One advantage of multiple configurators is for backup and restore of a network. If one of the configurators is not available, another can be used to configure new devices and maintain configuration of the current network.

Does the technology work with Wi-Fi EasyMesh, or other multiple access point Wi-Fi systems?

Yes, Wi-Fi Easy Connect can be used to provision clients to establish secure communications with Wi-Fi EasyMesh access points.

What if a home or office has more than one network?

If the home or office uses a single access point to provide more than one network, Wi-Fi Easy Connect can be used to add one or more networks on the access point. The Wi-Fi Easy Connect protocol would need to be run independently to add each network.

Can the same device be a configurator for more than one network?

Yes, the configurator software can be implemented on a device to provide provisioning for more than one logical network.

Is there a limit to how many devices one can configure at a time using Wi-Fi Easy Connect?

There is no limit to the number of devices a configurator may provision for a network, unless the network itself has connection limitations. Additionally, Wi-Fi Easy Connect enables bulk enrollment of Wi-Fi devices.